Wilwood 260-14241-BK Tandem Remote Master Cylinder - 7/8 in Bore, Dual Outlet, Black E-Coat

The Wilwood 260-14241-BK is a tandem remote mount master cylinder with a 7/8 in bore and a black e-coat finish, supplied with a pushrod. It is machined from a high pressure die casting and offers fluid outlet ports on both sides of the bore, so the plumbing can run whichever way the chassis needs.

Specifications

• Tandem remote mount master cylinder
• 7/8 in bore
• Dual outlet ports on both sides of the bore
• 1.12 in stroke with a 2:1 volume ratio between the primary and secondary chambers
• High pressure die cast body with a black e-coat finish
• Weighs about 3 lb, roughly 75 percent lighter than most cast iron OE type master cylinders
• Designed for mount flanges from 3.22 in to 3.40 in
• Pushrod included
• Manufacturer part number 260-14241-BK

Light weight, wide mounting range

At roughly 3 lb, this die cast body saves about 75 percent of the weight of most cast iron OE type master cylinders while keeping a conventional tandem circuit. The 3.22 in to 3.40 in mount flange range covers the common measurements used on most domestic cars and trucks from the mid-1960s to the present. Wilwood also builds a combination proportioning valve kit with brackets and stainless lines for these master cylinders under part number 260-14248.

Fitment

This master cylinder is specified by bore size and mount flange, not by a vehicle. Measure your mount flange and confirm the 7/8 in bore suits your pedal ratio and caliper piston volume before ordering.

Free shipping on orders over $75. 30-day returns.