Edelbrock Russell 656020 Competition Stainless Braided Brake Hose 12 inch -3AN to -3AN - Off-Road Race Use

Edelbrock Russell 656020 Competition Stainless Braided Brake Hose 12 inch -3AN to -3AN - Off-Road Race Use

$53.99
Sale price  $53.99 Regular price 
Skip to product information
Edelbrock Russell 656020 Competition Stainless Braided Brake Hose 12 inch -3AN to -3AN - Off-Road Race Use

Edelbrock Russell 656020 Competition Stainless Braided Brake Hose 12 inch -3AN to -3AN - Off-Road Race Use

$53.99
Sale price  $53.99 Regular price 

Edelbrock Russell 656020 Competition stainless steel braided brake hose with -3AN straight fittings on both ends, 12 inches long. Off-road / race use only — the assembly is non-DOT compliant so it is not legal for street registration in most states. Ideal for race cars, sand rails, off-road-only builds, and dirt track vehicles.

Specifications

  • Length: 12 inches
  • Fitting size: -3AN male to -3AN male (straight to straight)
  • Construction: Stainless steel outer braid, PTFE inner line
  • Hose ends: Zinc plated
  • Compliance: Non-DOT — off-road / competition use only

Typical Uses

  • Race cars — road course, oval, dirt track
  • Off-road / desert builds — Trophy Trucks, sand rails, prerunners
  • Dirt track and stock car applications
  • Custom brake system builds where -3AN fittings match the calipers or master cylinder

Non-DOT means this hose is not certified for on-road use. Verify your local regulations and vehicle registration status before installing on a street vehicle. Full brake parts collection for DOT-compliant OE-replacement brake lines.

Why Russell Brake Hose

  • Firmer pedal feel — stainless outer sleeve prevents the rubber-line balloon effect under hard braking
  • Higher burst pressure than OE rubber — appropriate for race duty
  • Edelbrock quality — Russell is Edelbrock's brake / plumbing brand with decades of race-industry credibility
  • Zinc plated ends — corrosion protection on the fittings that see moisture

Install Notes

  • Requires matching -3AN female fittings on your caliper adapter and master cylinder line
  • Use fresh copper crush washers on every -3AN joint — do not re-use old washers
  • Torque -3AN fittings to 8-10 ft-lb; do not overtighten
  • Full brake system flush and bleed after install — start at the wheel farthest from the master cylinder
  • Verify no rubbing against tires, control arms, or exhaust — hose rubbing failure is catastrophic

Warranty and Shipping

  • Edelbrock Russell manufacturer warranty
  • Free shipping on orders over $75
  • Same-day shipping on in-stock orders placed before 2 PM Eastern
  • 30-day return policy on unopened parts