{"title":"All Suspension and Steering","description":"\u003cp\u003eSuspension, steering, and chassis parts — shocks, struts, control arms, tie rods, ball joints, sway bar links, idler arms, wheel bearings.\u003c\/p\u003e","products":[{"product_id":"e-150-front-suspension-hardware-1977-2007-k8268","title":"E-150 Front Suspension Hardware 1977-2007 OEM K8268","description":"\u003cp\u003e\u003cstrong\u003eThis Moog front suspension hardware for 1977-2007 Ford E-150\u003c\/strong\u003e restores torque preload and OE ride quality with fresh bushings and mount pieces.\u003c\/p\u003e\n\u003cp\u003eSuspension hardware and mount kits cover the small pieces that hold the suspension together: strut mounts, bushings, radius-arm insulators, and the fasteners bundled with them. Fresh hardware restores factory torque preload, geometry, and ride quality.This is a front-axle application. Precise year-range coverage per manufacturer catalog: 1977-2007 Ford E-150; 1977-2007 Ford E-250; 1977-2007 Ford E-350; 1999-2007 Ford E-350 Super Duty; 1999-2002 Ford E-450 Econoline Super Duty.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eK8268\u003c\/strong\u003e. This is a Moog catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eWorn strut mounts announce themselves with clunks over bumps and vague steering feel. Fresh hardware restores torque preload and quiets the front end.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eTorque all fasteners to the vehicle-maker specification. Bushings with the correct durometer restore factory ride quality; over-torquing bushings while the suspension is unloaded pre-loads them incorrectly and shortens their life.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Moog","offers":[{"title":"Default Title","offer_id":58163207897391,"sku":"CBP-K8268","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_71865c7b-5ab1-46c0-b73b-16f989831d60.jpg?v=1783894400"},{"product_id":"cardone-steering-pump-pulley-36146","title":"Cardone Steering Pump Pulley OEM 36146","description":"\u003cp\u003e\u003cstrong\u003eThis Cardone steering pump pulley\u003c\/strong\u003e sized to OE belt-groove geometry and offset.\u003c\/p\u003e\n\u003cp\u003eThe power steering pump pulley is a precision press-fit component that must be pulled and installed with the correct puller and installer tools. A wobbly or noisy pulley usually points to a bent pulley or a bad pump shaft bearing behind it.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e36146\u003c\/strong\u003e. This is a Cardone catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA wobbly or noisy pulley usually points to a bent pulley or a bad pump shaft bearing behind it. Replace with the correct press-fit tool.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eUse a press-fit pulley puller and installer designed for this application. Improvised pullers bend the pulley or damage the pump shaft. Inspect the pump shaft seal while the pulley is off.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Cardone","offers":[{"title":"Default Title","offer_id":58163210387759,"sku":"CBP-36146","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_0c3a12b7-2950-4959-8488-f079aabb2dc2.jpg?v=1783894429"},{"product_id":"dorman-suspension-hardware-533-844","title":"Dorman Suspension Hardware OEM 533-844","description":"\u003cp\u003e\u003cstrong\u003eThis Dorman front suspension hardware\u003c\/strong\u003e restores torque preload and OE ride quality with fresh bushings and mount pieces.\u003c\/p\u003e\n\u003cp\u003eSuspension hardware and mount kits cover the small pieces that hold the suspension together: strut mounts, bushings, radius-arm insulators, and the fasteners bundled with them. Fresh hardware restores factory torque preload, geometry, and ride quality.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e533-844\u003c\/strong\u003e. This is a Dorman catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eWorn strut mounts announce themselves with clunks over bumps and vague steering feel. Fresh hardware restores torque preload and quiets the front end.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eTorque all fasteners to the vehicle-maker specification. Bushings with the correct durometer restore factory ride quality; over-torquing bushings while the suspension is unloaded pre-loads them incorrectly and shortens their life.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":58163215532335,"sku":"CBP-533844","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_1508bbe4-c19c-4ca6-a2a0-4909fbd589a5.jpg?v=1783894441"},{"product_id":"envoy-idler-arm-2004-2009-k80592","title":"Envoy Idler Arm 2004-2009 OEM K80592","description":"\u003cp\u003e\u003cstrong\u003eIdler arm for 2004-2009 gmc envoy\u003c\/strong\u003e restores on-center steering feel and eliminates highway wander.\u003c\/p\u003e\n\u003cp\u003eThe idler arm is the pivot arm that supports the center link on parallelogram steering systems (common on older trucks and body-on-frame SUVs). A worn idler arm causes the vehicle to dart over expansion joints and produces vague, imprecise on-center steering.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eK80592\u003c\/strong\u003e. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA vehicle that darts over expansion joints or has vague on-center steering is often a worn idler arm. Replace with a fresh assembly and align after.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eFront-end alignment is recommended after replacing the idler arm. Grease the fitting until fresh grease appears at the boot seams.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":58163219464495,"sku":"CBP-K80592","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_021e3554-9f1d-4b75-8245-b97399b03d49.jpg?v=1783894451"},{"product_id":"1500-tie-rod-2003-2008-es3625","title":"Ram 1500 Tie Rod 2003-2008 OEM ES3625","description":"\u003cp\u003e\u003cstrong\u003eThis Moog tie rod for 2003-2008 Ram 1500\u003c\/strong\u003e restores steering precision and eliminates on-center wander.\u003c\/p\u003e\n\u003cp\u003eTie rods are the steering linkage components that connect the steering rack (or center link) to the wheel spindle. Worn tie rods produce on-center wander, uneven inner-edge tire wear, and a click felt through the steering wheel over bumps. Front-end alignment is required after any tie-rod replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eES3625\u003c\/strong\u003e. This is a Moog catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eSymptoms of a bad tie rod: on-center wander, uneven inner-edge tire wear, or a click felt through the steering wheel over bumps. Alignment is mandatory after any tie-rod service.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eFront-end alignment is mandatory after replacing any tie-rod component. Count the exact number of threads exposed on the old tie rod before removing it as a starting reference for the new adjustment.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Moog","offers":[{"title":"Default Title","offer_id":58163221692719,"sku":"CBP-ES3625","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_ab32ab36-abaf-4601-9e88-81c989e7aa71.jpg?v=1783894458"},{"product_id":"1500-front-wheel-bearing-1995-1999-515006","title":"Ram 1500 Front Wheel Bearing 1995-1999 OEM 515006","description":"\u003cp\u003e\u003cstrong\u003eThis Moog front wheel bearing for 1995-1999 Ram 1500\u003c\/strong\u003e delivers a pre-greased, pre-sealed hub-and-bearing assembly ready to bolt on.\u003c\/p\u003e\n\u003cp\u003eThe wheel hub bearing carries the weight of the vehicle at each wheel and lets the wheel spin. Symptoms of a failing bearing include a humming that changes tone with steering input and a grinding felt through the floor at highway speed. Modern hub-and-bearing assemblies are one-piece and torque to a specific spec.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e515006\u003c\/strong\u003e. This is a Moog catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA humming that changes tone with steering input, a grinding felt through the floor at highway speed, or roughness felt when you spin the wheel by hand off the ground all point to a wheel bearing at end of life.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eTorque the hub nut to the vehicle-maker specification exactly. Under-torqued or over-torqued hubs damage the bearing quickly. On ABS-equipped vehicles, confirm the tone-ring sensor is not damaged.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Moog","offers":[{"title":"Default Title","offer_id":58163223462191,"sku":"CBP-515006","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_14bdfd7b-0219-48b7-b835-c596a6387f3a.jpg?v=1783894463"},{"product_id":"kyb-suspension-hardware-sm5266","title":"KYB Suspension Hardware OEM SM5266","description":"\u003cp\u003e\u003cstrong\u003eThis KYB suspension hardware\u003c\/strong\u003e restores torque preload and OE ride quality with fresh bushings and mount pieces.\u003c\/p\u003e\n\u003cp\u003eSuspension hardware and mount kits cover the small pieces that hold the suspension together: strut mounts, bushings, radius-arm insulators, and the fasteners bundled with them. Fresh hardware restores factory torque preload, geometry, and ride quality.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eSM5266\u003c\/strong\u003e. This is a KYB catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eWorn strut mounts announce themselves with clunks over bumps and vague steering feel. Fresh hardware restores torque preload and quiets the front end.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eTorque all fasteners to the vehicle-maker specification. Bushings with the correct durometer restore factory ride quality; over-torquing bushings while the suspension is unloaded pre-loads them incorrectly and shortens their life.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"KYB","offers":[{"title":"Default Title","offer_id":58163229196591,"sku":"CBP-SM5266","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_8936905e-8932-4051-a581-a9b7abab4576.jpg?v=1783894469"},{"product_id":"rancho-shock-absorber-rs999055","title":"Rancho Shock Absorber OEM RS999055","description":"\u003cp\u003e\u003cstrong\u003eThis Rancho front shock absorber\u003c\/strong\u003e restores body-motion control and OE damping response.\u003c\/p\u003e\n\u003cp\u003eShock absorbers control the compression and rebound of the suspension so the tire stays in contact with the road surface. When shocks fail, you get excessive body roll in corners, nose-dive under braking, tire cupping, and a floaty ride over expansion joints. Replacing shocks in axle pairs keeps handling balanced.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eRS999055\u003c\/strong\u003e. This is a Rancho catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eWorn shocks show up as excessive body roll in corners, nose-dive under braking, uneven tire wear (cupping on the outer or inner edge), or fluid leaking down the shock body. Any of these is enough reason to replace.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eReplace shocks in axle pairs to keep handling balanced. Cycle the new shock through its full stroke by hand to distribute the internal gas charge before installing. Torque the mounts to spec with the suspension loaded at ride height, not with the wheels hanging.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Rancho","offers":[{"title":"Default Title","offer_id":58163230245167,"sku":"CBP-RS999055","price":147.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_5ed2c1bf-718b-4857-8f1f-15114ee526ae.jpg?v=1783894476"},{"product_id":"accord-rear-ball-joint-1986-1989-rk9926","title":"Accord Rear Ball Joint 1986-1989 OEM RK9926","description":"\u003cp\u003e\u003cstrong\u003eThis Moog rear ball joint for 1986-1989 Honda Accord\u003c\/strong\u003e restores the control-arm-to-knuckle pivot with a fresh forged housing and sealed boot.\u003c\/p\u003e\n\u003cp\u003eThe ball joint is the pivot bearing between the control arm and the steering knuckle. Failed ball joints click over bumps, wander on-center, and can separate under load, dropping the wheel. Replace before failure.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eRK9926\u003c\/strong\u003e. This is a Moog catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA failing ball joint clicks or pops over speed bumps, wanders on-center, and eats tires from the inside edge. Replace before the ball stud separates from the housing - that failure drops the wheel into the fender.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eFront-end alignment is required after replacement. Use the correct press adapter for the vehicle - improvised presses damage the control arm bushing.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Moog","offers":[{"title":"Default Title","offer_id":58163233915183,"sku":"CBP-RK9926","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_87d8675c-147b-4779-9c4c-cb6d8905106f.jpg?v=1783894510"},{"product_id":"rancho-shock-absorber-rs999297","title":"Rancho Shock Absorber OEM RS999297","description":"\u003cp\u003e\u003cstrong\u003eThis Rancho rear shock absorber\u003c\/strong\u003e restores body-motion control and OE damping response.\u003c\/p\u003e\n\u003cp\u003eShock absorbers control the compression and rebound of the suspension so the tire stays in contact with the road surface. When shocks fail, you get excessive body roll in corners, nose-dive under braking, tire cupping, and a floaty ride over expansion joints. Replacing shocks in axle pairs keeps handling balanced.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eRS999297\u003c\/strong\u003e. This is a Rancho catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eWorn shocks show up as excessive body roll in corners, nose-dive under braking, uneven tire wear (cupping on the outer or inner edge), or fluid leaking down the shock body. Any of these is enough reason to replace.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eReplace shocks in axle pairs to keep handling balanced. Cycle the new shock through its full stroke by hand to distribute the internal gas charge before installing. Torque the mounts to spec with the suspension loaded at ride height, not with the wheels hanging.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Rancho","offers":[{"title":"Default Title","offer_id":58163237716271,"sku":"CBP-RS999297","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_9871b12f-9405-49f3-b570-d4d6276fe2fe.jpg?v=1783894595"},{"product_id":"driveworks-sway-bar-link-dw-k80685","title":"DriveWorks Sway Bar Link OEM DW-K80685","description":"\u003cp\u003e\u003cstrong\u003eThis DriveWorks sway bar link\u003c\/strong\u003e eliminates the clunk over expansion joints and restores factory sway-bar preload.\u003c\/p\u003e\n\u003cp\u003eSway bar links (stabilizer bar end links) connect the anti-roll bar to the lower control arm or strut. The molded bushings on each end fatigue and produce the classic clunk over expansion joints. Replace both sides at the same time to keep sway-bar preload even.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eDW-K80685\u003c\/strong\u003e. This is a DriveWorks catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eThe classic clunk over expansion joints, especially at low speed with a light throttle, is a worn sway-bar link. Replace both sides at the same time to keep preload balanced.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eReplace both sway-bar links at the same time to keep preload balanced. Torque with the suspension loaded at ride height, not with the wheels hanging.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"DriveWorks","offers":[{"title":"Default Title","offer_id":58163242565935,"sku":"CBP-DWK80685","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_522cb5f2-2773-4265-be63-e8df6c355b2a.jpg?v=1783894702"},{"product_id":"altima-ball-joint-1997-2001-w-k90386","title":"Altima Ball Joint 1997-2001 OEM DW-K90386","description":"\u003cp\u003e\u003cstrong\u003eThis DriveWorks ball joint for 1997-2001 Nissan Altima\u003c\/strong\u003e restores the control-arm-to-knuckle pivot with a fresh forged housing and sealed boot.\u003c\/p\u003e\n\u003cp\u003eThe ball joint is the pivot bearing between the control arm and the steering knuckle. Failed ball joints click over bumps, wander on-center, and can separate under load, dropping the wheel. Replace before failure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eDW-K90386\u003c\/strong\u003e. This is a DriveWorks catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA failing ball joint clicks or pops over speed bumps, wanders on-center, and eats tires from the inside edge. Replace before the ball stud separates from the housing - that failure drops the wheel into the fender.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eFront-end alignment is required after replacement. Use the correct press adapter for the vehicle - improvised presses damage the control arm bushing.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"DriveWorks","offers":[{"title":"Default Title","offer_id":58163242631471,"sku":"CBP-DWK90386","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_60bf6b15-edff-4937-a10e-ff86079897a1.jpg?v=1783894703"},{"product_id":"carquest-sway-bar-link-dw-k5334","title":"CarQuest Sway Bar Link OEM DW-K5334","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest sway bar link\u003c\/strong\u003e eliminates the clunk over expansion joints and restores factory sway-bar preload.\u003c\/p\u003e\n\u003cp\u003eSway bar links (stabilizer bar end links) connect the anti-roll bar to the lower control arm or strut. The molded bushings on each end fatigue and produce the classic clunk over expansion joints. Replace both sides at the same time to keep sway-bar preload even.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eDW-K5334\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eThe classic clunk over expansion joints, especially at low speed with a light throttle, is a worn sway-bar link. Replace both sides at the same time to keep preload balanced.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eReplace both sway-bar links at the same time to keep preload balanced. Torque with the suspension loaded at ride height, not with the wheels hanging.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163242697007,"sku":"CBP-DWK5334","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_f2554aba-3607-41dc-bae7-7829ef94d9bd.jpg?v=1783894705"},{"product_id":"moog-control-arm-rk642926","title":"Moog Control Arm OEM RK642926","description":"\u003cp\u003e\u003cstrong\u003eThis Moog control arm\u003c\/strong\u003e delivers a complete arm assembly with pressed-in bushings and OE geometry.\u003c\/p\u003e\n\u003cp\u003eA control arm is the pivoting suspension member that locates the wheel and holds the ball joint. When the bushings or ball joint fail, you hear clunks over bumps and lose alignment stability. Replacing the whole arm with fresh bushings pressed in is often faster and cheaper than pressing new bushings into the old arm.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eRK642926\u003c\/strong\u003e. This is a Moog catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFailed arm bushings show up as clunks over bumps, alignment that will not hold, and premature inner or outer tire wear depending on which bushing failed. Replace as a full arm assembly to save labor.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eAlign the vehicle after installation. Torque the ball-joint stud and bushing bolts to spec, and use fresh cotter pins where required.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Moog","offers":[{"title":"Default Title","offer_id":58163263144239,"sku":"CBP-RK642926","price":177.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_3061ec85-ca36-4659-a5d8-818d91874438.jpg?v=1783895150"}],"url":"https:\/\/corebrakeparts.com\/collections\/suspension-steering.oembed","provider":"CoreBrakeParts.com","version":"1.0","type":"link"}