{"title":"Dorman","description":"\u003cp\u003eDorman brake parts - genuine catalog with OE-equivalent coverage.\u003c\/p\u003e","products":[{"product_id":"nissan-throttle-body-977-563","title":"Nissan Throttle Body OEM 977-563","description":"\u003cp\u003e\u003cstrong\u003eThis Dorman throttle body for Nissan\u003c\/strong\u003e delivers an electronic throttle body with a position sensor calibrated to OE.\u003c\/p\u003e\n\u003cp\u003eThe electronic throttle body meters intake airflow into the engine and reports throttle position to the engine control module. A failing throttle body produces jumpy idle, throttle-tip glitches, and diagnostic codes for throttle-position or throttle-actuator faults. A throttle-relearn procedure is required on many vehicles after replacement so the ECU learns the new closed-throttle position.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e977-563\u003c\/strong\u003e. This is a Dorman catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA jumpy idle, throttle-response glitch, or diagnostic trouble code on the electronic throttle body all mean it is time for replacement. Perform the throttle-position relearn after installation.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003ePerform the throttle-position relearn procedure after installation on any vehicle that requires it (most drive-by-wire vehicles from 2005 on). Clear any stored diagnostic codes and confirm the idle returns to spec after a full warm-up cycle.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":58163206652207,"sku":"CBP-977563","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_c8dbdc00-3563-492c-bfaf-46605b4a13fd.jpg?v=1783894397"},{"product_id":"ford-exhaust-clamp-1999-2010-904-251","title":"Ford Exhaust Clamp 1999-2010 OEM 904-251","description":"\u003cp\u003e\u003cstrong\u003eThis Dorman exhaust clamp for 1999-2010 Ford\u003c\/strong\u003e delivers a corrosion-resistant clamp sized for the exhaust joint.\u003c\/p\u003e\n\u003cp\u003eExhaust clamps hold the joints between the exhaust pipe sections, catalytic converter, and muffler. Rusted clamps let exhaust leak upstream of the muffler, showing up as a drone at cruise and fume smell at idle.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e904-251\u003c\/strong\u003e. This is a Dorman catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA rusted clamp lets exhaust leak before the muffler, showing up as a drone at cruise and a fume smell at idle. Replace with the joint gasket where present.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eUse anti-seize on the clamp threads to keep future service possible. Verify the pipes are seated fully before torquing the clamp; a partially seated joint will leak regardless of clamp torque.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":58163214221615,"sku":"CBP-904251","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_0cde0b58-8ec1-423d-b0e4-bd23f2647a28.jpg?v=1783894437"},{"product_id":"accord-vvt-solenoid-2003-2011-917-277","title":"Accord VVT Solenoid 2003-2011 OEM 917-277","description":"\u003cp\u003e\u003cstrong\u003eThis Dorman vvt solenoid for 2003-2011 Honda Accord\u003c\/strong\u003e restores correct oil-pressure control to the cam phaser and clears P0011\/P0014 codes.\u003c\/p\u003e\n\u003cp\u003eThe variable valve timing solenoid controls oil pressure to the cam phaser. A stuck solenoid or a clogged screen produces cold-start rattle from the timing chain area and diagnostic codes like P0011 or P0014.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e917-277\u003c\/strong\u003e. This is a Dorman catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eCold-start rattle from the timing chain area, P0011 or P0014 codes, or a check-engine light that clears at idle and comes back under load usually point to a stuck VVT solenoid or clogged screen.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eClear diagnostic codes with a scan tool after installation. Confirm the solenoid screen is clean (some VVT failures are a clogged screen rather than a bad solenoid); replace both if in doubt.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":58163214680367,"sku":"CBP-917277","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_a1ca32c3-9659-4da4-894f-abb1ec3fb9b4.jpg?v=1783894439"},{"product_id":"dorman-suspension-hardware-533-844","title":"Dorman Suspension Hardware OEM 533-844","description":"\u003cp\u003e\u003cstrong\u003eThis Dorman front suspension hardware\u003c\/strong\u003e restores torque preload and OE ride quality with fresh bushings and mount pieces.\u003c\/p\u003e\n\u003cp\u003eSuspension hardware and mount kits cover the small pieces that hold the suspension together: strut mounts, bushings, radius-arm insulators, and the fasteners bundled with them. Fresh hardware restores factory torque preload, geometry, and ride quality.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e533-844\u003c\/strong\u003e. This is a Dorman catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eWorn strut mounts announce themselves with clunks over bumps and vague steering feel. Fresh hardware restores torque preload and quiets the front end.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eTorque all fasteners to the vehicle-maker specification. Bushings with the correct durometer restore factory ride quality; over-torquing bushings while the suspension is unloaded pre-loads them incorrectly and shortens their life.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":58163215532335,"sku":"CBP-533844","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_1508bbe4-c19c-4ca6-a2a0-4909fbd589a5.jpg?v=1783894441"},{"product_id":"ford-intake-manifold-gasket-2000-2016-615-188g","title":"Ford Intake Manifold Gasket 2000-2016 OEM 615-188G","description":"\u003cp\u003e\u003cstrong\u003eThis Dorman intake manifold gasket for 2000-2016 Ford\u003c\/strong\u003e seals the intake plenum to the cylinder heads with correct port geometry.\u003c\/p\u003e\n\u003cp\u003eThe intake manifold gasket seals the intake plenum to the cylinder heads. Coolant loss, misfire on a cold start, or an oil-fouled intake port are all signs the gasket has given up. Torque the new gasket in the manufacturer-specified sequence for a leak-free seal.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e615-188G\u003c\/strong\u003e. This is a Dorman catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eCoolant loss without a visible external leak, misfire on a cold start that clears once the engine is warm, or an oil-fouled intake port are all signs the manifold gasket has given up. Torque the new gasket in the manufacturer-specified sequence.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eTorque the manifold bolts in the manufacturer-specified sequence starting from the center of the manifold and working outward in a spiral pattern. Use the manufacturer-specified torque and re-torque on a heat cycle where the service manual calls for it.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":58163215991087,"sku":"CBP-615188G","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_38c86285-61d3-463f-8e67-8145f8628187.jpg?v=1783894443"},{"product_id":"chevrolet-master-cylinder-cm116209","title":"Chevrolet Master Cylinder OEM CM116209","description":"\u003cp\u003e\u003cstrong\u003eThis Dorman master cylinder for Chevrolet\u003c\/strong\u003e delivers a firm, high pedal with fresh cup seals and a properly machined bore.\u003c\/p\u003e\n\u003cp\u003eThe brake master cylinder is the tandem hydraulic pump behind the pedal that converts pedal travel into line pressure. Internal cup seals fatigue over time, bypassing fluid past the piston and producing a pedal that slowly sinks to the floor with the engine running. A new master cylinder has fresh seals, a properly machined bore, and the right port geometry for direct line-fit connection. Bench-bleed before installing for the shortest possible on-vehicle bleed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eCM116209\u003c\/strong\u003e. This is a Dorman catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA pedal that sinks slowly to the floor with the engine running is the classic internal cup-seal bypass failure. Fluid loss without an external leak points to the master cylinder. Bench-bleed the new master cylinder for the fastest possible pedal return.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eBench-bleed the new master cylinder before installing it on the vehicle. Clamp the mounting flange gently in a vise, install the bleeder-hose fittings included with the master cylinder, and stroke the piston slowly until no more air comes out of the ports. This is the single fastest way to shorten the on-vehicle bleed procedure and get a firm pedal immediately.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e\n\u003cp\u003eThis is a remanufactured unit sold with a core charge or core-return expectation. Return the original core to Core Brake Parts using the return label we send with your order to redeem the core credit.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":58163216843055,"sku":"CBP-CM116209","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_9086ed30-1cf4-4803-b52a-235322ee1e17.jpg?v=1783894444"}],"url":"https:\/\/corebrakeparts.com\/collections\/dorman.oembed","provider":"CoreBrakeParts.com","version":"1.0","type":"link"}