{"title":"chevrolet","description":"\u003cp\u003eBrake parts for chevrolet - verified fitment for the year, make, and model.\u003c\/p\u003e","products":[{"product_id":"chevrolet-thermostat-49875148","title":"Chevrolet Thermostat","description":"\u003cp\u003e\u003cstrong\u003eThis MotoRad thermostat for Chevrolet\u003c\/strong\u003e calibrated to OE opening temperature and rate for the target engine.\u003c\/p\u003e\n\u003cp\u003eThe engine coolant thermostat is the mechanical valve that controls how quickly the engine warms up and holds the operating temperature. A stuck-closed stat overheats the engine on the highway; a stuck-open stat gives slow warm-up, poor heater output, and a fuel-economy penalty. Replace the gasket or seal at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number is not stamped on this piece. Verify against the OE reference for your vehicle before installation, and match physically against the part you are replacing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA stuck-closed stat overheats the engine on the highway. A stuck-open stat means slow warm-up, poor heater output, and a fuel-economy penalty. Replace the gasket or seal at the same time and refill with fresh coolant.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall with the jiggle-valve or bleed hole facing up (for gravity air escape). Refill the cooling system with fresh coolant of the correct type and bleed per the vehicle-maker procedure.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"MotoRad","offers":[{"title":"Default Title","offer_id":58163211632943,"sku":"CBP-49875148","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_d08a8542-2374-47d3-9ec8-bbcd034bb963.jpg?v=1783894431"},{"product_id":"chevrolet-master-cylinder-cm116209","title":"Chevrolet Master Cylinder OEM CM116209","description":"\u003cp\u003e\u003cstrong\u003eThis Dorman master cylinder for Chevrolet\u003c\/strong\u003e delivers a firm, high pedal with fresh cup seals and a properly machined bore.\u003c\/p\u003e\n\u003cp\u003eThe brake master cylinder is the tandem hydraulic pump behind the pedal that converts pedal travel into line pressure. Internal cup seals fatigue over time, bypassing fluid past the piston and producing a pedal that slowly sinks to the floor with the engine running. A new master cylinder has fresh seals, a properly machined bore, and the right port geometry for direct line-fit connection. Bench-bleed before installing for the shortest possible on-vehicle bleed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eCM116209\u003c\/strong\u003e. This is a Dorman catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eA pedal that sinks slowly to the floor with the engine running is the classic internal cup-seal bypass failure. Fluid loss without an external leak points to the master cylinder. Bench-bleed the new master cylinder for the fastest possible pedal return.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eBench-bleed the new master cylinder before installing it on the vehicle. Clamp the mounting flange gently in a vise, install the bleeder-hose fittings included with the master cylinder, and stroke the piston slowly until no more air comes out of the ports. This is the single fastest way to shorten the on-vehicle bleed procedure and get a firm pedal immediately.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e\n\u003cp\u003eThis is a remanufactured unit sold with a core charge or core-return expectation. Return the original core to Core Brake Parts using the return label we send with your order to redeem the core credit.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":58163216843055,"sku":"CBP-CM116209","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_9086ed30-1cf4-4803-b52a-235322ee1e17.jpg?v=1783894444"},{"product_id":"chevrolet-fuel-pump-1510502","title":"Chevrolet Fuel Pump OEM 1510502","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest fuel pump for Chevrolet\u003c\/strong\u003e delivers OE-calibrated flow and pressure with a fresh strainer sock included.\u003c\/p\u003e\n\u003cp\u003eThe in-tank fuel pump module supplies fuel from the tank to the engine's fuel rail at the calibrated pressure and volume. Pumps fail from age, heat, ethanol exposure, and running the tank near empty for long periods. Symptoms include long cranking at start, engine stumble under load, and pump whine that grows as the fuel level drops. Replace the strainer sock with any pump service.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e1510502\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eSymptoms of a failing pump: long cranking at start, engine stumble under load, or a pump whine that grows louder as the tank level drops. On modern returnless systems, low pressure at the rail confirms the pump diagnosis. Replace the strainer sock at the same time.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003ePrime the fuel rail before the first crank by cycling the key on and off two or three times without cranking. Check for leaks at the fuel-rail feed and return lines before starting. Replace the strainer sock at the same time as the pump - this is included with most modern pump modules.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e\n\u003cp\u003eThis is a remanufactured unit sold with a core charge or core-return expectation. Return the original core to Core Brake Parts using the return label we send with your order to redeem the core credit.\u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163236471087,"sku":"CBP-1510502","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_d1ea9f46-ef86-4f1d-bd3e-313127a6bdd5.jpg?v=1783894570"},{"product_id":"chevrolet-front-brake-hardware-kit-h5752q","title":"Chevrolet Front Brake Hardware Kit OEM H5752Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest front brake hardware kit for Chevrolet\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5752Q\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243319599,"sku":"CBP-H5752Q","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_58c0c29c-8ac7-4152-88a3-189b6ec91cbf.jpg?v=1783894717"}],"url":"https:\/\/corebrakeparts.com\/collections\/chevrolet.oembed","provider":"CoreBrakeParts.com","version":"1.0","type":"link"}