{"title":"Brake Hardware Kit","description":"\u003cp\u003eBrake Hardware Kit - verified fitment, honest cross-references, brake specialist support.\u003c\/p\u003e","products":[{"product_id":"carquest-brake-hardware-kit-h5659q","title":"CarQuest Brake Hardware Kit OEM H5659Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5659Q\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163230179631,"sku":"CBP-H5659Q","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_058ee506-2611-4f49-a3d9-df44e3a99f5e.jpg?v=1783894474"},{"product_id":"carquest-brake-hardware-kit-h7306","title":"CarQuest Brake Hardware Kit OEM H7306","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH7306\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163230441775,"sku":"CBP-H7306","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_f2cf47aa-011c-4033-b99e-cc942af12724.jpg?v=1783894480"},{"product_id":"carquest-brake-hardware-kit-h5685q","title":"CarQuest Brake Hardware Kit OEM H5685Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5685Q\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163230507311,"sku":"CBP-H5685Q","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_1b25042a-cdb1-493b-89a4-ab21835c218f.jpg?v=1783894482"},{"product_id":"carquest-brake-hardware-kit-h5756q","title":"CarQuest Brake Hardware Kit OEM H5756Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5756Q\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163230572847,"sku":"CBP-H5756Q","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_7a24af15-54a0-4428-a78d-c20f1cde9e93.jpg?v=1783894484"},{"product_id":"carquest-brake-hardware-kit-h5643q","title":"CarQuest Brake Hardware Kit OEM H5643Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5643Q\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163230638383,"sku":"CBP-H5643Q","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_9d8a9800-bf14-4438-9d72-98f385fb23fd.jpg?v=1783894486"},{"product_id":"f250-f35-brake-hardware-kit-5572a","title":"F250 F35 Brake Hardware Kit OEM 5572A","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit for Ford F250 F35\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e5572A\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163238273327,"sku":"CBP-5572A","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_c9c22682-62a0-4fdc-afa6-4a1f82f55bde.jpg?v=1783894608"},{"product_id":"nissan-front-brake-hardware-kit-13520q","title":"Nissan Front Brake Hardware Kit OEM 13520Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver front brake hardware kit for Nissan\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13520Q\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163238338863,"sku":"CBP-13520Q","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_2cac0e4a-28cd-4aa9-a658-c05b8860e135.jpg?v=1783894609"},{"product_id":"chry-front-brake-hardware-kit-h5702","title":"Chry Front Brake Hardware Kit OEM H5702","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver front brake hardware kit for Dodge Chry\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5702\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163238404399,"sku":"CBP-H5702","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_e43bd27f-ef4e-4df7-8944-503dded971d5.jpg?v=1783894611"},{"product_id":"carquest-brake-hardware-kit-2635","title":"CarQuest Brake Hardware Kit OEM 2635","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e2635\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163238469935,"sku":"CBP-2635","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_54965139-615e-4792-b0c0-7deb818538dd.jpg?v=1783894612"},{"product_id":"carquest-brake-hardware-kit-13423qa","title":"CarQuest Brake Hardware Kit OEM 13423QA","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13423QA\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163238535471,"sku":"CBP-13423QA","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_6934eed5-e741-4395-822c-520f6ba3b85d.jpg?v=1783894614"},{"product_id":"6-brake-hardware-kit-1993-2005-13346","title":"Mazda 6 Brake Hardware Kit 1993-2005 OEM 13346","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit for 1993-2005 Mazda 6\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13346\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163238633775,"sku":"CBP-13346","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_6fec0b6e-6599-4c48-b616-62794c33d0e4.jpg?v=1783894616"},{"product_id":"versa-front-brake-hardware-kit-2012-2019-13385q","title":"Versa Front Brake Hardware Kit 2012-2019 OEM 13385Q","description":"\u003cp\u003e\u003cstrong\u003eFront brake hardware kit for 2012-2019 nissan versa\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13385Q\u003c\/strong\u003e. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":58163238699311,"sku":"CBP-13385Q","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_db43085b-4f83-4b48-8226-4a5a82835884.jpg?v=1783894617"},{"product_id":"carquest-brake-hardware-kit-13287","title":"CarQuest Brake Hardware Kit OEM 13287","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13287\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163238764847,"sku":"CBP-13287","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_ed3d63f8-60d3-4d4f-aec9-bf50a4ae8946.jpg?v=1783894619"},{"product_id":"carquest-brake-hardware-kit-13519","title":"CarQuest Brake Hardware Kit OEM 13519","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13519\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163238830383,"sku":"CBP-13519","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_13319b76-3336-4178-adad-2c59d2603cc5.jpg?v=1783894621"},{"product_id":"carquest-brake-hardware-kit-5606a","title":"CarQuest Brake Hardware Kit OEM 5606A","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e5606A\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163238895919,"sku":"CBP-5606A","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_2574f7e3-7e87-43bc-8105-fe5011cd502e.jpg?v=1783894622"},{"product_id":"spectra-brake-hardware-kit-2005-2009-11649232","title":"Spectra Brake Hardware Kit 2005-2009 OEM 13463Q","description":"\u003cp\u003e\u003cstrong\u003eThis Carlson brake hardware kit for 2005-2009 Kia Spectra\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number is not stamped on this piece. Verify against the OE reference for your vehicle before installation, and match physically against the part you are replacing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Carlson","offers":[{"title":"Default Title","offer_id":58163238994223,"sku":"CBP-11649232","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_635e9518-4b23-4045-9add-8676a4089345.jpg?v=1783894624"},{"product_id":"carquest-brake-hardware-kit-13506","title":"CarQuest Brake Hardware Kit OEM 13506","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13506\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163239059759,"sku":"CBP-13506","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_39d527d6-7ebb-447b-b1ef-b3142868e846.jpg?v=1783894626"},{"product_id":"carquest-brake-hardware-kit-h5632q","title":"CarQuest Brake Hardware Kit OEM H5632Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5632Q\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163239485743,"sku":"CBP-H5632Q","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_945aeeed-2967-4e77-a7c0-15dadc94d745.jpg?v=1783894637"},{"product_id":"carquest-brake-hardware-kit-13572","title":"CarQuest Brake Hardware Kit OEM 13572","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13572\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163239551279,"sku":"CBP-13572","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_257dddd6-f378-4605-bdde-6d0db51a081f.jpg?v=1783894638"},{"product_id":"pilot-front-brake-hardware-kit-2003-2008-13398q","title":"Pilot Front Brake Hardware Kit 2003-2008 OEM 13398Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest front brake hardware kit for 2003-2008 Honda Pilot\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13398Q\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163239977263,"sku":"CBP-13398Q","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_134cc74e-2420-4aac-8160-b583098c3639.jpg?v=1783894640"},{"product_id":"cr-v-brake-hardware-kit-2005-17410","title":"CR-V Brake Hardware Kit 2005 OEM 17410","description":"\u003cp\u003e\u003cstrong\u003eBrake hardware kit for 2005 honda cr-v\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e17410\u003c\/strong\u003e. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":58163240042799,"sku":"CBP-17410","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_8a29c9c0-2aab-4275-93eb-058df353db73.jpg?v=1783894642"},{"product_id":"prius-rear-brake-hardware-kit-13582q","title":"Prius Rear Brake Hardware Kit OEM 13582Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver rear brake hardware kit for Toyota Prius\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13582Q\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240108335,"sku":"CBP-13582Q","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_644ddda9-44ce-488f-a515-5a9f413ffabd.jpg?v=1783894644"},{"product_id":"tl-brake-hardware-kit-2004-13536","title":"TL Brake Hardware Kit 2004 OEM 13536","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit for 2004 Acura TL\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13536\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240239407,"sku":"CBP-13536","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_c2ad0499-4205-47ff-a08b-6094940d8a60.jpg?v=1783894647"},{"product_id":"carquest-brake-hardware-kit-17225","title":"CarQuest Brake Hardware Kit OEM 17225","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e17225\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240304943,"sku":"CBP-17225","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_4b30e14c-06be-44ac-867f-dca8c8f26be5.jpg?v=1783894649"},{"product_id":"325i-front-brake-hardware-kit-13577q","title":"325i Front Brake Hardware Kit OEM 13577Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver front brake hardware kit for BMW 325i\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13577Q\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240370479,"sku":"CBP-13577Q","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_32a134e1-ab01-41e2-b1fe-644cf8cc9488.jpg?v=1783894651"},{"product_id":"escape-rear-brake-hardware-kit-h2673","title":"Escape Rear Brake Hardware Kit OEM H2673","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver rear brake hardware kit for Ford Escape\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH2673\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240436015,"sku":"CBP-H2673","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_ce2fbc02-751f-463f-88f0-724fa9998ba7.jpg?v=1783894652"},{"product_id":"carlson-brake-hardware-kit-h7320","title":"Carlson Brake Hardware Kit OEM H7320","description":"\u003cp\u003e\u003cstrong\u003eThis Carlson rear brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH7320\u003c\/strong\u003e. This is a Carlson catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Carlson","offers":[{"title":"Default Title","offer_id":58163240567087,"sku":"CBP-H7320","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_a3cf0f63-c819-4eeb-ac5e-b8dd2d0199e8.jpg?v=1783894656"},{"product_id":"carquest-brake-hardware-kit-h2331","title":"CarQuest Brake Hardware Kit OEM H2331","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver rear brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH2331\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240632623,"sku":"CBP-H2331","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_17e48fe3-084e-4ae7-a38c-d45465bda46a.jpg?v=1783894658"},{"product_id":"carquest-brake-hardware-kit-h2577","title":"CarQuest Brake Hardware Kit OEM H2577","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH2577\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240698159,"sku":"CBP-H2577","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_9c61b29f-7eac-42a6-ad0d-2bb8dac5d97d.jpg?v=1783894659"},{"product_id":"carquest-brake-hardware-kit-h5522","title":"CarQuest Brake Hardware Kit OEM H5522","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5522\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240763695,"sku":"CBP-H5522","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_24862b66-df0e-4d05-a500-2cd8cfccd58d.jpg?v=1783894661"},{"product_id":"pt-cruiser-rear-brake-hardware-kit-h7300","title":"PT Cruiser Rear Brake Hardware Kit OEM H7300","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver rear brake hardware kit for Chrysler PT Cruiser\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH7300\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240829231,"sku":"CBP-H7300","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_14c637e4-3242-4c84-9d72-3d9d61dc8036.jpg?v=1783894662"},{"product_id":"carquest-brake-hardware-kit-h5519","title":"CarQuest Brake Hardware Kit OEM H5519","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5519\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163240927535,"sku":"CBP-H5519","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_65090dc7-09b5-49fb-8f08-8d3cb59fdb22.jpg?v=1783894664"},{"product_id":"dodge-front-brake-hardware-kit-h5687q","title":"Dodge Front Brake Hardware Kit OEM H5687Q","description":"\u003cp\u003e\u003cstrong\u003eThis Carlson front brake hardware kit for Dodge\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5687Q\u003c\/strong\u003e. This is a Carlson catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"Carlson","offers":[{"title":"Default Title","offer_id":58163240993071,"sku":"CBP-H5687Q","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_6baff753-da26-4a1c-8cd6-3208617bc58a.jpg?v=1783894665"},{"product_id":"carquest-brake-hardware-kit-h2671","title":"CarQuest Brake Hardware Kit OEM H2671","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH2671\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163241058607,"sku":"CBP-H2671","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_852f4a77-7de9-43cf-adb7-9bd8492af85e.jpg?v=1783894667"},{"product_id":"f-250-rear-brake-hardware-kit-h2318","title":"F-250 Rear Brake Hardware Kit OEM H2318","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver rear brake hardware kit for Ford F-250\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH2318\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163241124143,"sku":"CBP-H2318","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_4426e503-70e6-4522-8c00-8148175fa295.jpg?v=1783894669"},{"product_id":"colorado-brake-hardware-kit-2004-2008-h2347","title":"Colorado Brake Hardware Kit 2004-2008 OEM H2347","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit for 2004-2008 Chevrolet Colorado\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH2347\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163242860847,"sku":"CBP-H2347","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_fae2e40e-e851-42c9-b923-4f4fa87383f1.jpg?v=1783894708"},{"product_id":"carquest-brake-hardware-kit-5695qa","title":"CarQuest Brake Hardware Kit OEM 5695QA","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e5695QA\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243024687,"sku":"CBP-5695QA","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_54b2534b-cdfe-418e-b2c8-7a7f744495a6.jpg?v=1783894710"},{"product_id":"f-150-brake-hardware-kit-1975-1996-h2313","title":"F-150 Brake Hardware Kit 1975-1996 OEM H2313","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit for 1975-1996 Ford F-150\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH2313\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243090223,"sku":"CBP-H2313","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_4bfd0184-601e-4ff5-9a83-c867185a7469.jpg?v=1783894712"},{"product_id":"carquest-brake-hardware-kit-h5812q","title":"CarQuest Brake Hardware Kit OEM H5812Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5812Q\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243155759,"sku":"CBP-H5812Q","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_218fb5ac-9925-434d-a3f1-019461cafef4.jpg?v=1783894714"},{"product_id":"carquest-brake-hardware-kit-h7002","title":"CarQuest Brake Hardware Kit OEM H7002","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest rear brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH7002\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243221295,"sku":"CBP-H7002","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_d277ab3d-ef03-450e-8a77-dadce94b7ab9.jpg?v=1783894715"},{"product_id":"chevrolet-front-brake-hardware-kit-h5752q","title":"Chevrolet Front Brake Hardware Kit OEM H5752Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest front brake hardware kit for Chevrolet\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5752Q\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243319599,"sku":"CBP-H5752Q","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_58c0c29c-8ac7-4152-88a3-189b6ec91cbf.jpg?v=1783894717"},{"product_id":"dakota-rear-brake-hardware-kit-2003-2004-h7327","title":"Dakota Rear Brake Hardware Kit 2003-2004 OEM H7327","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest rear brake hardware kit for 2003-2004 Dodge Dakota\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH7327\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243450671,"sku":"H7327","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_e195597a-79f7-4eb2-8479-a2c8d3b203eb.jpg?v=1783894720"},{"product_id":"carquest-brake-hardware-kit-5461a","title":"CarQuest Brake Hardware Kit 2-Pack OEM 5461A","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver brake hardware kit\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation. Sold as a 2-count pack for the target application.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.The manufacturer part number covers a broad range of makes, models, and model years - which is common for hardware kits, hydraulic components, and service items where the same physical piece is used across many platforms. The correct way to confirm this fits your vehicle is to match the manufacturer part number against your service manual, the OE parts diagram, or the part you are replacing. If your service manual cross-references this manufacturer PN, or if the piece you are removing carries this number physically stamped or labeled, you are looking at the correct replacement.\u003c\/p\u003e\n\u003cp\u003eIf you would like us to verify fitment against your VIN or vehicle configuration before you buy, contact us with the year, make, model, submodel, and trim of your vehicle and we will confirm the cross-reference against the manufacturer catalog.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e5461A\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243516207,"sku":"5461A","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_d79f0856-a00f-4e84-a602-83651dca3c3e.jpg?v=1783894722"},{"product_id":"ford-brake-hardware-kit-h9404","title":"Ford Brake Hardware Kit OEM H9404","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest brake hardware kit for Ford\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH9404\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243581743,"sku":"H9404-2","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_341dc53f-d090-4b44-9860-f02b65d7655e.jpg?v=1783894723"},{"product_id":"grand-caravan-rear-brake-hardware-kit-1997-2007-h7323","title":"Grand Caravan Rear Brake Hardware Kit 1997-2007 OEM H7323","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver rear brake hardware kit for 1997-2007 Dodge Grand Caravan\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH7323\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243647279,"sku":"H7323","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_928e285b-4547-4e1b-bab9-09725f3dcfee.jpg?v=1783894725"},{"product_id":"rav4-rear-brake-hardware-kit-2006-2018-13518q","title":"RAV4 Rear Brake Hardware Kit 2006-2018 OEM 13518Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver rear brake hardware kit for 2006-2018 Toyota RAV4\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e13518Q\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243712815,"sku":"13518Q","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_23ebb3e5-e569-4912-a4b1-40a844375fc1.jpg?v=1783894726"},{"product_id":"tundra-front-brake-hardware-kit-15752a","title":"Tundra Front Brake Hardware Kit OEM 15752A","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver front brake hardware kit for Toyota Tundra\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003e15752A\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243778351,"sku":"15752A","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_79150b69-9835-439a-8e4a-7a9327cb6a4c.jpg?v=1783894728"},{"product_id":"explorer-rear-brake-hardware-kit-h7299","title":"Explorer Rear Brake Hardware Kit OEM H7299","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver rear brake hardware kit for Ford Explorer\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH7299\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243909423,"sku":"H7299","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_488e883c-d96c-4320-9f5d-f0317de291c2.jpg?v=1783894731"},{"product_id":"2500-front-brake-hardware-kit-h5677q","title":"Ram 2500 Front Brake Hardware Kit OEM H5677Q","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest WearEver front brake hardware kit for Ram 2500\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a front-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH5677Q\u003c\/strong\u003e. This is a CarQuest \/ WearEver catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163243974959,"sku":"H5677Q","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_c203541e-db91-40c8-8139-af75cd97a151.jpg?v=1783894733"},{"product_id":"chevrolet-rear-brake-hardware-kit-2001-2009-h7330","title":"Chevrolet Rear Brake Hardware Kit 2001-2009 OEM H7330","description":"\u003cp\u003e\u003cstrong\u003eThis CarQuest rear brake hardware kit for 2001-2009 Chevrolet\u003c\/strong\u003e restores clean pad seating, correct clip spring pressure, and quiet operation.\u003c\/p\u003e\n\u003cp\u003eBrake hardware kits contain the small clips, springs, shims, and abutment plates that hold the pads correctly in the caliper bracket and let the caliper slide free on its guide pins. Factory clips fatigue, corrode, and lose spring tension with time, which is the single most common cause of brake squeal, uneven pad wear, and pads that rattle in the bracket over bumps. Every serious brake job replaces the hardware.This is a rear-axle application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerify your fitment with the year, make, model, and trim of your vehicle before ordering.\u003c\/em\u003e If you are not sure, contact us with your VIN or vehicle configuration and we will match the correct part to your application before you buy.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer part number \u003cstrong\u003eH7330\u003c\/strong\u003e. This is a CarQuest catalog part. Confirm the OE reference for your vehicle matches before installing.\u003c\/p\u003e\n\u003ch3\u003eWhy You Might Need This\u003c\/h3\u003e\n\u003cp\u003eFatigued factory clips are the top cause of brake squeal, pads that rock in the caliper bracket, and the uneven pad wear that shows up as tapered pads or one pad worn faster than the other. Any brake service that reuses old clips is asking for a comeback complaint. Fresh stainless clips restore correct pad clearance in the bracket, keep the pad centered on the rotor, and eliminate one of the top no-fault brake noise complaints.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall the new clips, shims, and abutment plates at the same time as new pads. Clean the caliper bracket seats down to bare metal before seating the new clips - old rust and pad material behind a clip will hold the pad off-center and cause noise. A thin film of high-temperature brake grease on the clip-to-pad-ear contact points keeps everything quiet without contaminating the friction surface.\u003c\/p\u003e\n\u003ch3\u003eShipping and Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping on orders over $75.\u003c\/strong\u003e Same-day shipping on in-stock parts ordered before 2:00 PM CT weekdays. Orders placed after the same-day cutoff ship the next business day. Every order ships from our climate-controlled warehouse; parts do not sit outside where humidity and temperature swings could damage packaging.\u003c\/p\u003e\n\u003cp\u003e30-day return window on unopened, unused parts in original packaging. Open parts installed without verified fitment: no return, or up to a 40 percent restocking fee depending on condition. Brake friction material (pads and shoes) is safety-critical and cannot be returned once a pad has touched a rotor. If a part does not fit your vehicle as described, we cover the return shipping and make it right. \u003c\/p\u003e","brand":"CarQuest","offers":[{"title":"Default Title","offer_id":58163244106031,"sku":"H7330","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/1822\/7503\/files\/s-l1600_6bd46c97-e9e6-477c-ab7f-e801a4deae37.jpg?v=1783894735"}],"url":"https:\/\/corebrakeparts.com\/collections\/brake-hardware-kit.oembed","provider":"CoreBrakeParts.com","version":"1.0","type":"link"}